| Max.swing over bed: |
400mm |
| Max.swing over carriage: |
260mm |
| Max.swing over gap: |
700mm |
| Max. Length of work piece: |
1500mm |
| Max. cutting length: |
1450mm |
| Dia.of spindle bore: |
52mm |
| Taper of center sleeve: |
Morse No.6 |
| Spindle speed: |
11-1400rpm/22speeds |
| Longitudinal feed: |
0.035-2.842mm/rev |
| Cross feed: |
0.009-0.804mm/rev |
| Metric thread: |
0.5-240(66) |
| Whitworth thread: |
80-1/4(49)tpi |
| Module thread: |
0.25-120(57)mm |
| Diametrical pitch thread: |
160-7-16DP(50)mm |
| Section of tool shank: |
25×25 |
| Travel of top slide: |
150mm |
| Max.travel of cross slide: |
348mm |
| Pitch of longitudinal leadscrew: |
12mm |
| Travel of tailstock center sleeve: |
150mm |
| Diameter of tailstock center sleeve: |
75mm |
| Taper of tailstock center sleeve: |
Morse No.5 |
| Main motor power: |
7.5kW(50Hz) |
| Wooden case/Steel pallet: |
750mm:2740×1150×1900/2580×1120×1610mm |
| |
2770/2070|2820/2120|2928/2228 |
| Gross/net weight(kg): |
1000mm:2990×1150×1900/2800×1120×1610mm |
| |
2815/2120|2865/2170|2973/2278 |
| |
1500mm:3490×1150×1900/3300×1120×1610mm |
| |
3905/2170|2955/2220|3063/2328 |
| |
2000mm:3990×1150×1900/3800×1120×1610mm |
| |
2995/2280|3045/2330|3153/2438 |
| |
3000mm:4990×1150×1900/4800×1120×1610mm |
| |
3245/2330 |
